PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M5501/2-R8
M5501/2-R8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M5501/2-R8 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-142-3085, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M5501/2-R8
NSN: 5340-01-142-3085
FSC: 5340
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM5501/2-R8
NSN5340-01-142-3085
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M5501/2-R8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATURES PROVIDED: SHOULDER
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 0.750-16 UNF
•
OVERALL DIAMETER: 0.960 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
MATERIAL: PLASTIC
•
DRIVE TYPE: HEX SOCKET OR SCREW SLOT OR SERRATED
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, CLASS L, GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
•
DESIGN TYPE: THREADED
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDSHOULDER
THREAD SIZE AND SERIES/TYPE DESIGNATOR0.750-16 UNF
OVERALL DIAMETER0.960 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN
THREAD CLASS2A A
MATERIALPLASTIC
DRIVE TYPEHEX SOCKET OR SCREW SLOT OR SERRATED
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-390, TYPE 1, CLASS L, GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
DESIGN TYPETHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
TF12Upgraded Successor
successor cross-reference
successor
99-1090212Upgraded Successor
successor cross-reference
successor
6530-00-C95-2136Upgraded Successor
successor cross-reference
successor
MIL-C-5501Upgraded Successor
successor cross-reference
successor
M5501/2-R10Upgraded Successor
successor cross-reference
successor
MIL-C-5501/2Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M5501/2-R8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M5501/2-R8?
M5501/2-R8 is a M5501/2-R8.
What parts can replace M5501/2-R8?
There are 17 known substitutes for M5501/2-R8: TF12, 99-1090212, 6530-00-C95-2136 and 14 more. Substitute compatibility should be verified for your specific system.
Is M5501/2-R8 still available?
M5501/2-R8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M5501/2-R8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026