PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M5501/1-F16
M5501/1-F16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M5501/1-F16 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-804-1253, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M5501/1-F16
NSN: 5340-00-804-1253
FSC: 5340
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM5501/1-F16
NSN5340-00-804-1253
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M5501/1-F16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: THREADED
•
DRIVE TYPE: HEX SOCKET OR SCREW SLOT OR SERRATED OR SQUARE HEAD
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1-5/16-12 UN
•
OVERALL DIAMETER: 2.063 INCHES NOMINAL IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND A CLASS AND 16 SIZE
TECHNICAL CHARACTERISTICS (FLIS)
DESIGN TYPETHREADED
DRIVE TYPEHEX SOCKET OR SCREW SLOT OR SERRATED OR SQUARE HEAD
THREAD SIZE AND SERIES/TYPE DESIGNATOR1-5/16-12 UN
OVERALL DIAMETER2.063 INCHES NOMINAL IN
MATERIALPLASTIC, POLYETHYLENE (PP)
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-390, TYPE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
NONDEFINITIVE SPEC/STD DATA1 TYPE AND A CLASS AND 16 SIZE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
M5501/1-R6Upgraded Successor
successor cross-reference
successor
MILC5501Upgraded Successor
successor cross-reference
successor
MIL-C-5501/1Upgraded Successor
successor cross-reference
successor
M5501/1-R8Upgraded Successor
successor cross-reference
successor
PD60Upgraded Successor
successor cross-reference
successor
25726009-04Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M5501/1-F16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M5501/1-F16?
M5501/1-F16 is a M5501/1-F16.
What parts can replace M5501/1-F16?
There are 22 known substitutes for M5501/1-F16: M5501/1-R6, MILC5501, MIL-C-5501/1 and 19 more. Substitute compatibility should be verified for your specific system.
Is M5501/1-F16 still available?
M5501/1-F16 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M5501/1-F16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026