PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M52525/16-20
M52525/16-20 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The M52525/16-20 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-255-0560, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M52525/16-20
NSN: 4730-00-255-0560
FSC: 4730
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM52525/16-20
NSN4730-00-255-0560
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: M52525/16-20 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.808 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
•
BOLT HOLE DIAMETER: 0.469 INCHES NOMINAL IN
•
FLANGE LENGTH: 3.120 INCHES NOMINAL IN
•
FLANGE SECTION STYLE: RECESSED FACE, RAISED NECK
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CRITICALITY CODE JUSTIFICATIONFEAT
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.808 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-Z-325,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
BOLT HOLE DIAMETER0.469 INCHES NOMINAL IN
FLANGE LENGTH3.120 INCHES NOMINAL IN
FLANGE SECTION STYLERECESSED FACE, RAISED NECK
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.120 INCHES NOMINAL IN
SPECIAL FEATURESSUPPORTS CLARK MODEL 290M;TRACTOR,WHEELED,IND.,DIESEL DRIVEN;MED DBP,NSN 2420000889384,W/ROPS NSN 2420010590090,SPLIT FLANGE TYPE;WEAPON SYSTEM ESSENTIAL W
FLANGE WIDTH2.780 INCHES NOMINAL IN
MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 36
663095Interchangeable
interchangeable cross-reference
interchangeable
94-4644-24Interchangeable
interchangeable cross-reference
interchangeable
3H4330Interchangeable
interchangeable cross-reference
interchangeable
51H-32Interchangeable
interchangeable cross-reference
interchangeable
4730001165229Interchangeable
interchangeable cross-reference
interchangeable
M52525/16-32Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M52525/16-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M52525/16-20?
M52525/16-20 is a M52525/16-20.
What parts can replace M52525/16-20?
There are 36 known substitutes for M52525/16-20: 663095, 94-4644-24, 3H4330 and 33 more. Substitute compatibility should be verified for your specific system.
Is M52525/16-20 still available?
M52525/16-20 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M52525/16-20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026