PartsTable
Technical Data Sheet
PartsTable / MRO / M468
M468 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include material: STEEL OVERALL, body_style: W/MTG BRACKET, TERMINAL(S) ON ONE END, body_length: 1.500 INCHES NOMINAL IN, body_diameter: 1.000 INCHES NOMINAL IN, hole_diameter: 0.377 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, hardness_rating: 38.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-261-7340, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ M468
NSN: 5310-00-261-7340
FSC: 5310
CAGE: 79807 — WROUGHT WASHER MFG., INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleW/MTG BRACKET, TERMINAL(S) ON ONE END
body_length1.500 INCHES NOMINAL IN
body_diameter1.000 INCHES NOMINAL IN
hole_diameter0.377 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
hardness_rating38.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
outside_diameter0.680 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
features_providedMOUNTING HARDWARE AND HERMETICALLY SEALED CASE
material_thickness0.094 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
reliability_indicatorNOT ESTABLISHED
terminal_type_and_quantity1 THREADED HOLE
NSN5310-00-261-7340
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: M468 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A576 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 0.680 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.094 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.377 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A576 ASSN STD ALL MATERIAL RESPONSES OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER0.680 INCHES MAXIMUM IN
MATERIAL THICKNESS0.094 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
HOLE DIAMETER0.377 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
120382Interchangeable
interchangeable cross-reference
interchangeable
25704-281340-09-0Interchangeable
interchangeable cross-reference
interchangeable
2N2979Interchangeable
interchangeable cross-reference
interchangeable
0.5M7.5AZ2Interchangeable
interchangeable cross-reference
interchangeable
HP09476Interchangeable
interchangeable cross-reference
interchangeable
C291-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M468?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M468?
M468 is a CAPACITOR,FIXED,PAPER DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace M468?
There are 29 known substitutes for M468: 120382, 25704-281340-09-0, 2N2979 and 26 more. Substitute compatibility should be verified for your specific system.
Is M468 still available?
M468 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M468

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026