PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M45938/6-2C
M45938/6-2C ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The M45938/6-2C is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-044-6577, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M45938/6-2C
NSN: 5310-01-044-6577
FSC: 5310
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM45938/6-2C
NSN5310-01-044-6577
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: M45938/6-2C · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
•
THREAD DIRECTION: RIGHT-HAND
•
NUT HEIGHT: 0.132 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
•
TEMP RATING: 450.0 FAHRENHEIT NOMINAL DEGF
•
THREAD CLASS: 3B
•
NUT DIAMETER: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
PILOT DIAMETER: 0.127 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
THREAD DIRECTIONRIGHT-HAND
NUT HEIGHT0.132 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
TEMP RATING450.0 FAHRENHEIT NOMINAL DEGF
THREAD CLASS3B
NUT DIAMETER0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
PILOT LENGTH0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
PILOT DIAMETER0.127 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
1752101-3Interchangeable
interchangeable cross-reference
interchangeable
M45938-6-8Interchangeable
interchangeable cross-reference
interchangeable
MILN45938-6Interchangeable
interchangeable cross-reference
interchangeable
1752101-4Interchangeable
interchangeable cross-reference
interchangeable
M45938-6-6Interchangeable
interchangeable cross-reference
interchangeable
200AS106-6B060CRInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M45938/6-2C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M45938/6-2C?
M45938/6-2C is a M45938/6-2C.
What parts can replace M45938/6-2C?
There are 21 known substitutes for M45938/6-2C: 1752101-3, M45938-6-8, MILN45938-6 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M45938/6-2C?
M45938/6-2C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-044-6577. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M45938/6-2C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026