PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M45913/3-24CG8C
M45913/3-24CG8C ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The M45913/3-24CG8C is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-477-6162, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M45913/3-24CG8C
NSN: 5310-01-477-6162
FSC: 5310
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM45913/3-24CG8C
NSN5310-01-477-6162
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: M45913/3-24CG8C · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT HEIGHT: 1.578 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
MATERIAL: STEEL NUT
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J995,GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE NUT
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
NOMINAL THREAD SIZE: 1.500 INCHES IN
•
BEARING SURFACE TYPE: CHAMFERED
•
SPECIFICATION/STANDARD DATA: 81349-MIL-DTL-45913/3A GOVERNMENT SPECIFICATION A
TECHNICAL CHARACTERISTICS (FLIS)
NUT HEIGHT1.578 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
MATERIALSTEEL NUT
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J995,GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE NUT
BEARING SURFACE FINISH125.0 MICROINCHES
NOMINAL THREAD SIZE1.500 INCHES IN
BEARING SURFACE TYPECHAMFERED
SPECIFICATION/STANDARD DATA81349-MIL-DTL-45913/3A GOVERNMENT SPECIFICATION A
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE II,CLASS 2/3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
SURFACE TREATMENTCADMIUM OVERALL EXCEPT INSERT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
5210114 PART 153Interchangeable
interchangeable cross-reference
interchangeable
5310PL0645410Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-45913/3A-M45913/3-12CG8Interchangeable
interchangeable cross-reference
interchangeable
5210114Interchangeable
Winch Mk3 Mod 16 Na
interchangeable
5210114 PART 154Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M45913/3-24CG8C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M45913/3-24CG8C?
M45913/3-24CG8C is a M45913/3-24CG8C.
What parts can replace M45913/3-24CG8C?
There are 5 known substitutes for M45913/3-24CG8C: 5210114 PART 153, 5310PL0645410, MIL-DTL-45913/3A-M45913/3-12CG8 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M45913/3-24CG8C?
M45913/3-24CG8C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-477-6162. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M45913/3-24CG8C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026