PartsTable / COMPONENT / M44-51
M44-51
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: LEATHER CATTLEHIDE OVERALL, outside_diameter: 0.255 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.145 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN, cross-sectional_thickness: 0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-238-7951, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
M44-51
NSN: 5330-00-238-7951 FSC: 5330 CAGE: 91340 — MET-PRO CORPORATION (USA)
SPECIFICATIONS
material LEATHER CATTLEHIDE OVERALL outside_diameter 0.255 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN style_designator CIRCULAR aperture_diameter 0.145 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN cross-sectional_thickness 0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION material_document_and_classification KK-L-164 TANNAGE 3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL NSN 5330-00-238-7951
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: M44-51
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• STYLE DESIGNATOR: CIRCULAR
• APERTURE DIAMETER: 0.145 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN
• MATERIAL DOCUMENT AND CLASSIFICATION: KK-L-164 TANNAGE 3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
• OUTSIDE DIAMETER: 0.255 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
• MATERIAL: LEATHER CATTLEHIDE OVERALL
• CROSS-SECTIONAL THICKNESS: 0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION STYLE DESIGNATOR CIRCULAR APERTURE DIAMETER 0.145 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN MATERIAL DOCUMENT AND CLASSIFICATION KK-L-164 TANNAGE 3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OUTSIDE DIAMETER 0.255 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN MATERIAL LEATHER CATTLEHIDE OVERALL CROSS-SECTIONAL THICKNESS 0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
4451 Interchangeable interchangeable cross-reference
interchangeable
445-00001 Interchangeable interchangeable cross-reference
interchangeable
10288-8 Interchangeable interchangeable cross-reference
interchangeable
7T01491LPC8 Interchangeable interchangeable cross-reference
interchangeable
39534 Interchangeable interchangeable cross-reference
interchangeable
10124792 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy M44-51?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M44-51?
M44-51 is a GASKET.
What parts can replace M44-51?
There are 14 known substitutes for M44-51: 4451, 445-00001, 10288-8 and 11 more. Substitute compatibility should be verified for your specific system.
Is M44-51 still available?
M44-51 is currently cancelled.