PartsTable
Technical Data Sheet
Download PDF

M4304 PC NO 5 — FASTENER,PAWL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M4304 PC NO 5: FASTENER,PAWL.

The FASTENER,PAWL is a the manufacturer industrial component. Key specifications include length: 1.270 INCHES NOMINAL IN, diameter: 1.100 INCHES NOMINAL IN, material: ZINC OVERALL, special_features: HEAD OF FASTENER IS SLOTTED AND OPERATED MANUALLY BY TOOL, style_designator: KNURLED, features_provided: SPRING. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-614-1780, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M4304 PC NO 5
NSN: 5340-01-614-1780
FSC: 5340 — Hardware, Commercial
CAGE: 62144 — PARKER HANNIFIN CORPORATION DIV VILLAGE MARINE TECH (USA)
SPECIFICATIONS
length1.270 INCHES NOMINAL IN
diameter1.100 INCHES NOMINAL IN
materialZINC OVERALL
special_featuresHEAD OF FASTENER IS SLOTTED AND OPERATED MANUALLY BY TOOL
style_designatorKNURLED
features_providedSPRING
pawl_actuation_methodKEY
end_item_identificationPANEL, CONTROL
part_name_assigned_by_controlling_agencyCAM LATCH
pawl_length_from_actuating_shaft_center_to_pawl_end1.770 INCHES NOMINAL IN
NSN5340-01-614-1780
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M4304 PC NO 5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.270 INCHES NOMINAL IN
•
PAWL ACTUATION METHOD: KEY
•
STYLE DESIGNATOR: KNURLED
•
DIAMETER: 1.100 INCHES NOMINAL IN
•
FEATURES PROVIDED: SPRING
TECHNICAL CHARACTERISTICS
LENGTH1.270 INCHES NOMINAL IN
PAWL ACTUATION METHODKEY
STYLE DESIGNATORKNURLED
DIAMETER1.100 INCHES NOMINAL IN
FEATURES PROVIDEDSPRING
SPECIAL FEATURESHEAD OF FASTENER IS SLOTTED AND OPERATED MANUALLY BY TOOL
PART NAME ASSIGNED BY CONTROLLING AGENCYCAM LATCH
END ITEM IDENTIFICATIONPANEL, CONTROL
MATERIALZINC OVERALL
PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END1.770 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
70-0038Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy M4304 PC NO 5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M4304 PC NO 5?
M4304 PC NO 5 is a FASTENER,PAWL.
What parts can replace M4304 PC NO 5?
There is 1 known substitute for M4304 PC NO 5: 70-0038. Substitute compatibility should be verified for your specific system.
What is the NSN for M4304 PC NO 5?
M4304 PC NO 5 is cataloged in the U.S. Government catalog under NSN 5340-01-614-1780. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M4304 PC NO 5