PartsTable
Technical Data Sheet

M40CO 13/32 — DRILL,TWIST

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

M40CO 13/32: DRILL,TWIST.

The DRILL,TWIST is a the manufacturer industrial component. Key specifications include material: STEEL ALLOY OVERALL, point_type: SPLIT, point_angle: 135.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 1.938 INCHES NOMINAL IN, overall_length: 3.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-01-095-6732, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M40CO 13/32
NSN: 5133-01-095-6732
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 16568 — PRECISION TWIST DRILL CO (USA)
SPECIFICATIONS
materialSTEEL ALLOY OVERALL
point_typeSPLIT
point_angle135.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length1.938 INCHES NOMINAL IN
flute_quantity2
overall_length3.312 INCHES NOMINAL IN
shank_diameter0.406 INCHES NOMINAL IN
special_featuresSCREW MACHINE LG; FRACTIONAL SIZE 13/32
cutting_end_styleGENERAL PURPOSE
surface_treatmentOXIDE FILM OVERALL
nominal_cutting_diameter0.4062 INCHES IN
NSN5133-01-095-6732
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available DRILL,TWIST TITLE COMPONENT PN M40CO 13/32 MFR DRILL,TWIST
KEY FEATURES
•
SHANK DIAMETER: 0.406 INCHES NOMINAL IN
•
CUTTING END STYLE: GENERAL PURPOSE
•
FLUTE LENGTH: 1.938 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 0.4062 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 80205-NAS907 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
NONDEFINITIVE SPEC/STD DATA: F TYPE
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.406 INCHES NOMINAL IN
CUTTING END STYLEGENERAL PURPOSE
FLUTE LENGTH1.938 INCHES NOMINAL IN
OVERALL LENGTH3.312 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER0.4062 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA80205-NAS907 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATAF TYPE
SHANK STYLESTRAIGHT ROUND
FLUTE QUANTITY2
SUBSTITUTES & CROSS-REFERENCES 5
3311 13/32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
40326Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NAS907 TYFSZ13/32Reference document
Same NSN cross-reference
Reference document — Secondary reference
NAS907Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
35094Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy M40CO 13/32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M40CO 13/32?
M40CO 13/32 is a DRILL,TWIST.
What parts can replace M40CO 13/32?
There are 5 known substitutes for M40CO 13/32: 3311 13/32, 40326, NAS907 TYFSZ13/32 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M40CO 13/32?
M40CO 13/32 is cataloged in the U.S. Government catalog under NSN 5133-01-095-6732. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M40CO 13/32