PartsTable
Technical Data Sheet
PartsTable / MRO / M39029-01-12-12

M39029-01-12-12 — Cable Assembly Specs

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The M39029-01-12-12 is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CONTACT, point_length: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN, overall_length: 0.501 INCHES NOMINAL IN, point_diameter: 0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN, overall_diameter: 0.155 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN, style_designator: CENTER CONTACT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5999-00-205-9346, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ M39029-01-12-12
NSN: 5999-00-205-9346
FSC: 5999
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY CONTACT
point_length0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
overall_length0.501 INCHES NOMINAL IN
point_diameter0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
overall_diameter0.155 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
style_designatorCENTER CONTACT
precious_materialGOLD
surface_treatmentGOLD CONTACT
identification_code_colorBROWN AND BLACK AND ORANGE LOCATION NOT OTHERWISE SPECIFIED
precious_material_and_locationCONTACT GOLD
NSN5999-00-205-9346
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN M39029-01-12-12 MFR M39029-01-12-12
KEY FEATURES
•
MATERIAL: COPPER ALLOY CONTACT
•
PIN DIAMETER: 0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
•
PRECIOUS MATERIAL AND WEIGHT: 0.010 GOLD GRAINS, TROY
•
SURFACE TREATMENT: GOLD BODY AND CONTACT
•
PIN LENGTH: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
RETENTION GROOVE DIAMETER: 0.155 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
•
CABLE ENTRANCE DIAMETER: 0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 81349-MIL-C-39029 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TECHNICAL CHARACTERISTICS
MATERIALCOPPER ALLOY CONTACT
PIN DIAMETER0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
PRECIOUS MATERIAL AND WEIGHT0.010 GOLD GRAINS, TROY
SURFACE TREATMENTGOLD BODY AND CONTACT
PIN LENGTH0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
RETENTION GROOVE DIAMETER0.155 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
CABLE ENTRANCE DIAMETER0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
TEST DATA DOCUMENT81349-MIL-C-39029 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
PRECIOUS MATERIAL AND LOCATIONEXTERNAL SURFACES GOLD
MOUNTING METHODFORCE FIT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
SAE-AS39029/1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MIL-C-39029/01InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
M39029-0-12-12InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
MIL-C-39029/0InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
M39029-01-12InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy M39029-01-12-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M39029-01-12-12?
M39029-01-12-12 is a M39029-01-12-12. It is classified as a MRO (MRO_GENERAL).
What parts can replace M39029-01-12-12?
There are 5 known substitutes for M39029-01-12-12: SAE-AS39029/1, MIL-C-39029/01, M39029-0-12-12 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M39029-01-12-12?
M39029-01-12-12 is cataloged in the Federal Logistics Information System under NSN 5999-00-205-9346. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M39029-01-12-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026