PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M38527/07-001D
M38527/07-001D ✓ Verified by PartsTable
— · CABLE ASSEMBLY
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The M38527/07-001D is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-088-3081, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M38527/07-001D
NSN: 5999-01-088-3081
FSC: 5999
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM38527/07-001D
NSN5999-01-088-3081
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN M38527/07-001D MFR M38527/07-001D
KEY FEATURES
•
OVERALL DIAMETER: 0.290 INCHES NOMINAL0.290 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 81349-MIL-M-38527/7 GOVERNMENT SPECIFICATION81349-MIL-M-38527/7 GOVERNMENT SPECIFICATION
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-14,TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSEMIL-M-14,TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING FACILITY TYPE AND QUANTITY: 6 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY6 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY
•
UNTHREADED MOUNTING HOLE DIAMETER: 0.020 INCHES MINIMUM AND 0.020 INCHES MINIMUM AND 0.038 INCHES MAXIMUM SECOND MOUNTING FACILITY0.038 INCHES MAXIMUM SECOND MOUNTING FACILITY IN
•
TEST DATA DOCUMENT: 81349-MIL-M-38527 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).81349-MIL-M-38527 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.125 INCHES NOMINAL0.125 INCHES NOMINAL IN
OVERALL DIAMETER0.290 INCHES NOMINAL0.290 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA81349-MIL-M-38527/7 GOVERNMENT SPECIFICATION81349-MIL-M-38527/7 GOVERNMENT SPECIFICATION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-14,TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSEMIL-M-14,TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE
MOUNTING FACILITY TYPE AND QUANTITY6 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY6 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY
MOUNTING FACILITY TYPE AND QUANTITY8 UNTHREADED HOLE(S) SECOND MOUNTING FACILITY8 UNTHREADED HOLE(S) SECOND MOUNTING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER0.020 INCHES MINIMUM AND 0.020 INCHES MINIMUM AND 0.038 INCHES MAXIMUM SECOND MOUNTING FACILITY0.038 INCHES MAXIMUM SECOND MOUNTING FACILITY IN
TEST DATA DOCUMENT81349-MIL-M-38527 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).81349-MIL-M-38527 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MATERIALPLASTIC DIALLYL PHTHALATE
UNTHREADED MOUNTING HOLE DIAMETER0.020 INCHES MINIMUM AND 0.020 INCHES MINIMUM AND 0.033 INCHES MAXIMUM FIRST MOUNTING FACILITY0.033 INCHES MAXIMUM FIRST MOUNTING FACILITY IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
M38527/07-006Upgraded Successor
successor cross-reference
successor
M38527/07-006NUpgraded Successor
successor cross-reference
successor
M38527/7-06DUpgraded Successor
successor cross-reference
successor
7717-11GUpgraded Successor
successor cross-reference
successor
10104DAPUpgraded Successor
successor cross-reference
successor
400-308MUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy M38527/07-001D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M38527/07-001D?
M38527/07-001D is a M38527/07-001D.
What parts can replace M38527/07-001D?
There are 27 known substitutes for M38527/07-001D: M38527/07-006, M38527/07-006N, M38527/7-06D and 24 more. Substitute compatibility should be verified for your specific system.
Is M38527/07-001D still available?
M38527/07-001D is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M38527/07-001D

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026