PartsTable
Technical Data Sheet
Download PDF

M3607 — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M3607: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include special_features: 3 1/2 GAGE 50PSI 60-260F 1/2 BTM, end_item_identification: 4520-01-677-4986; BOILER, HEATING,LOW PRESSURE; PN 2128-8C-30-HW. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-356-4757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M3607
NSN: 5340-00-356-4757
NIINs: 003564757, 016926712
FSC: 5340 — Hardware, Commercial
CAGE: 14608 — EMHART INDUSTRIES INC CORBIN CABINET LOCK HARDWARE DIV (USA)
SPECIFICATIONS
special_features3 1/2 GAGE 50PSI 60-260F 1/2 BTM
end_item_identification4520-01-677-4986; BOILER, HEATING,LOW PRESSURE; PN 2128-8C-30-HW
NSN5340-00-356-4757
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M3607 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE HOLE QUANTITY: 1
•
DESIGN TYPE: LOOP ENGAGING
•
STYLE DESIGNATOR: LEVER
•
CATCH STRIKE STYLE: MORTISE
•
SURFACE HOLE DIAMETER: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.250 INCHES NOMINAL IN
SURFACE HOLE QUANTITY1
DESIGN TYPELOOP ENGAGING
STYLE DESIGNATORLEVER
CATCH STRIKE STYLEMORTISE
OVERALL LENGTH0.500 INCHES NOMINAL IN
OVERALL WIDTH0.562 INCHES NOMINAL IN
SURFACE HOLE DIAMETER0.312 INCHES NOMINAL IN
WIDTH0.187 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
USP211A41Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy M3607?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M3607?
M3607 is a CATCH,CLAMPING.
What parts can replace M3607?
There is 1 known substitute for M3607: USP211A41. Substitute compatibility should be verified for your specific system.
What is the NSN for M3607?
M3607 is cataloged in the U.S. Government catalog under NSN 5340-00-356-4757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M3607