PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M35KDDFS160
M35KDDFS160 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 5.00 MILLIMETERS NOMINAL MM, overall_width: 6.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-8266, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M35KDDFS160
NSN: 3110-00-293-8266
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter5.00 MILLIMETERS NOMINAL MM
overall_width6.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter19.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-00-293-8266
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M35KDDFS160 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH6.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO.3
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
RETAINER FABRICATION METHODPRESSED
SHIELD QUANTITY2
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 37
RV619XGEF-M-ISOFLEXLDS18SPEZAInterchangeable
interchangeable cross-reference
interchangeable
AM36KDDFS160Interchangeable
interchangeable cross-reference
interchangeable
RV619XGEF-M-IS0FInterchangeable
interchangeable cross-reference
interchangeable
9038Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171/1Interchangeable
interchangeable cross-reference
interchangeable
38ZInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M35KDDFS160?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M35KDDFS160?
M35KDDFS160 is a BEARING,BALL,ANNULAR.
What parts can replace M35KDDFS160?
There are 37 known substitutes for M35KDDFS160: RV619XGEF-M-ISOFLEXLDS18SPEZA, AM36KDDFS160, RV619XGEF-M-IS0F and 34 more. Substitute compatibility should be verified for your specific system.
Is M35KDDFS160 still available?
M35KDDFS160 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M35KDDFS160

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026