PartsTable
Technical Data Sheet
Download PDF

M32CR632-5 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

M32CR632-5: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.247 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, thread_length: 0.229 INCHES MINIMUM IN, fastener_length: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-803-3104, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M32CR632-5
NSN: 5305-00-803-3104
FSC: 5305 — Screws
CAGE: 26233 — NYLOK LLC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.247 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
thread_length0.229 INCHES MINIMUM IN
fastener_length0.312 INCHES NOMINAL IN
locking_featurePATCH OR STRIP THREADS
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
internal_drive_styleSLOT
nominal_thread_diameter0.138 INCHES IN
NSN5305-00-803-3104
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: M32CR632-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.312 INCHES NOMINAL IN
•
THREAD LENGTH: 0.229 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
LOCKING FEATURE: PATCH OR STRIP THREADS
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.312 INCHES NOMINAL IN
THREAD LENGTH0.229 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREPATCH OR STRIP THREADS
SURFACE TREATMENTPASSIVATE OVERALL
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
THREAD CLASS2A A
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
2256624PC1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M32CR632-5ESame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy M32CR632-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M32CR632-5?
M32CR632-5 is a SCREW,CAP,SOCKET HEAD.
What parts can replace M32CR632-5?
There are 2 known substitutes for M32CR632-5: 2256624PC1, M32CR632-5E. Substitute compatibility should be verified for your specific system.
What is the NSN for M32CR632-5?
M32CR632-5 is cataloged in the U.S. Government catalog under NSN 5305-00-803-3104. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M32CR632-5