PartsTable
Technical Data Sheet
Download PDF

M32CR1032-10E — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

M32CR1032-10E: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.509 INCHES MINIMUM IN, fastener_length: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-850-3754, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M32CR1032-10E
NSN: 5305-00-850-3754
FSC: 5305 — Screws
CAGE: 26233 — NYLOK LLC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.509 INCHES MINIMUM IN
fastener_length0.625 INCHES NOMINAL IN
locking_featurePELLET THREADS
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
surface_treatmentPASSIVATE OVERALL
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
NSN5305-00-850-3754
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: M32CR1032-10E · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD LENGTH: 0.509 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
LOCKING FEATURE: PELLET THREADS
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD LENGTH0.509 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREPELLET THREADS
SURFACE TREATMENTPASSIVATE OVERALL
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
THREAD CLASS2A A
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
2562-43764Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy M32CR1032-10E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M32CR1032-10E?
M32CR1032-10E is a SCREW,CAP,SOCKET HEAD.
What parts can replace M32CR1032-10E?
There is 1 known substitute for M32CR1032-10E: 2562-43764. Substitute compatibility should be verified for your specific system.
What is the NSN for M32CR1032-10E?
M32CR1032-10E is cataloged in the U.S. Government catalog under NSN 5305-00-850-3754. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M32CR1032-10E