PartsTable
Technical Data Sheet
Download PDF

M26633-030 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

M26633-030: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.212 INCHES MINIMUM IN, connection_style: SWIVEL NUT FLARE FIRST END. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-846-6129, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M26633-030
NSN: 4720-00-846-6129
FSC: 4720 — Hose and Flexible Tubing
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.212 INCHES MINIMUM IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.703 INCHES MAXIMUM IN
special_featuresINNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE
thread_directionRIGHT-HAND FIRST END
features_providedELECTROSTATIC DISCHARGE CAPABILITY AND PERFORATED OUTER COVER
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure12000.0 POUNDS PER SQUARE INCH LBS
NSN4720-00-846-6129
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: M26633-030 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 360.000 INCHES NOMINAL WORKING IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 3.250 INCHES IN
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE OR OUTER LAYER WRAPPED RUBBER, CHLOROPRENE
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH360.000 INCHES NOMINAL WORKING IN
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS3.250 INCHES IN
CONNECTION STYLESWIVEL NUT FLARE FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE OR OUTER LAYER WRAPPED RUBBER, CHLOROPRENE
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER0.703 INCHES MAXIMUM IN
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
SUBSTITUTES & CROSS-REFERENCES 5
MIL-H-26633-360Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-DTL-26633Reference document
Same NSN cross-reference
Reference document — Identification reference
M26633-3600Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AE1010119E3600Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-H-26633Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy M26633-030?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M26633-030?
M26633-030 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace M26633-030?
There are 5 known substitutes for M26633-030: MIL-H-26633-360, MIL-DTL-26633, M26633-3600 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M26633-030?
M26633-030 is cataloged in the U.S. Government catalog under NSN 4720-00-846-6129. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M26633-030

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.