M25988-2-212 — PACKING,FUEL FILTE

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

M25988-2-212: PACKING,FUEL FILTE.

The PACKING,FUEL FILTE is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ OR RUBBER SYNTHETIC, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.137 INCHES NOMINAL IN, center_hole_diameter: 0.823 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.131 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-081-9502, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M25988-2-212

NSN: 5331-01-081-9502
NIINs: 010819502, 016014041
FSC: 5331 — O-ring
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	RUBBER FLUOROSILICONE CLASS FQ OR RUBBER SYNTHETIC
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	1.137 INCHES NOMINAL IN
center_hole_diameter	0.823 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.131 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN	5331-01-081-9502

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.131 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.137 INCHES NOMINAL IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.823 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROSILICONE CLASS FQ OR RUBBER SYNTHETIC

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.131 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.137 INCHES NOMINAL IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.823 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROSILICONE CLASS FQ OR RUBBER SYNTHETIC

SUBSTITUTES & CROSS-REFERENCES 4

S9412-212Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-DTL-25988/2Reference document

Same NSN cross-reference

Reference document — Identification reference

S8057AP-17Reference document

Same NSN cross-reference

Reference document — Secondary reference

10129582Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy M25988-2-212?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M25988-2-212?

M25988-2-212 is a PACKING,FUEL FILTE.

What parts can replace M25988-2-212?

There are 4 known substitutes for M25988-2-212: S9412-212, MIL-DTL-25988/2, S8057AP-17 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for M25988-2-212?

M25988-2-212 is cataloged in the U.S. Government catalog under NSN 5331-01-081-9502. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M25988-2-212 — PACKING,FUEL FILTE

Request a Quote — M25988-2-212