PartsTable
Technical Data Sheet

M25988/4-906 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M25988/4-906: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ, temp_rating: -90.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, center_hole_diameter: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-058-4014, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M25988/4-906
NSN: 5331-01-058-4014
FSC: 5331 — O-ring
CAGE: 1CN74 — FREUDENBERG-NOK GENERAL PARTNERSHIP DBA INTERNATIONAL SEAL CO INC (USA)
SPECIFICATIONS
materialRUBBER FLUOROSILICONE CLASS FQ
temp_rating-90.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL
outside_diameter0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
center_hole_diameter0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
NSN5331-01-058-4014
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M25988/4-906 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -90.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ
TECHNICAL CHARACTERISTICS
TEMP RATING-90.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROSILICONE CLASS FQ
SUBSTITUTES & CROSS-REFERENCES 8
3-906 L806-80Reference document
Same NSN cross-reference
Reference document — Secondary reference
3-906L1218-80Reference document
Same NSN cross-reference
Reference document — Secondary reference
571034-06Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5331PL1253755Reference document
Same NSN cross-reference
Reference document — Informative reference only
3-906L1007-80Reference document
Same NSN cross-reference
Reference document — Secondary reference
3-906L308-80Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy M25988/4-906?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M25988/4-906?
M25988/4-906 is a O-RING.
What parts can replace M25988/4-906?
There are 8 known substitutes for M25988/4-906: 3-906 L806-80, 3-906L1218-80, 571034-06 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M25988/4-906?
M25988/4-906 is cataloged in the U.S. Government catalog under NSN 5331-01-058-4014. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M25988/4-906