M25988/3-018 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

M25988/3-018: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.734 INCHES MINIMUM AND 0.744 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-185-1735, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M25988/3-018

NSN: 5331-00-185-1735
FSC: 5331 — O-ring
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	RUBBER
hardness_rating	60.0 SHORE DUROMETER A NOMINAL
center_hole_diameter	0.734 INCHES MINIMUM AND 0.744 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-185-1735

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.734 INCHES MINIMUM AND 0.744 INCHES MAXIMUM IN

•

MATERIAL: RUBBER

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING	60.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.734 INCHES MINIMUM AND 0.744 INCHES MAXIMUM IN
MATERIAL	RUBBER

SUBSTITUTES & CROSS-REFERENCES 5

2-018L1223-60Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-DTL-25988/3Reference document

Same NSN cross-reference

Reference document — Identification reference

16606A54-94Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MIL-R-25988/3Reference document

Same NSN cross-reference

Reference document — Secondary reference

3541-31-018Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy M25988/3-018?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M25988/3-018?

M25988/3-018 is a O-RING.

What parts can replace M25988/3-018?

There are 5 known substitutes for M25988/3-018: 2-018L1223-60, MIL-DTL-25988/3, 16606A54-94 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for M25988/3-018?

M25988/3-018 is cataloged in the U.S. Government catalog under NSN 5331-00-185-1735. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M25988/3-018 — O-RING

Request a Quote — M25988/3-018