M25988/1-008 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

M25988/1-008: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ, temp_rating: -100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.305 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN, center_hole_diameter: 0.170 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-702-7062, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M25988/1-008

NSN: 5331-00-702-7062
FSC: 5331 — O-ring
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	RUBBER FLUOROSILICONE CLASS FQ
temp_rating	-100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.305 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
center_hole_diameter	0.170 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-702-7062

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.305 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.170 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROSILICONE CLASS FQ

TECHNICAL CHARACTERISTICS

TEMP RATING	-100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.305 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.170 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROSILICONE CLASS FQ

SUBSTITUTES & CROSS-REFERENCES 9

182555Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2-008L677-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-R-25988/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

5331PL0657456Reference document

Same NSN cross-reference

Reference document — Informative reference only

2-008E515-8Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MIL-DTL-25988/1Reference document

Same NSN cross-reference

Reference document — Identification reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy M25988/1-008?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M25988/1-008?

M25988/1-008 is a O-RING.

What parts can replace M25988/1-008?

There are 9 known substitutes for M25988/1-008: 182555, 2-008L677-70, MIL-R-25988/1 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for M25988/1-008?

M25988/1-008 is cataloged in the U.S. Government catalog under NSN 5331-00-702-7062. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M25988/1-008 — O-RING

Request a Quote — M25988/1-008