PartsTable
Technical Data Sheet

M24231/9-013 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

M24231/9-013: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY A OVERALL, hole_diameter: 0.636 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN, hardness_rating: 33.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM, outside_diameter: 1.079 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, material_thickness: 0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-187-2430, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M24231/9-013
NSN: 5310-00-187-2430
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialNICKEL ALLOY A OVERALL
hole_diameter0.636 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
hardness_rating33.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
outside_diameter1.079 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
material_thickness0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
minimum_tensile_strength155000 POUNDS PER SQUARE INCH LBS
material_document_and_classificationQQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-187-2430
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: M24231/9-013 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.079 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 155000 POUNDS PER SQUARE INCH LBS
•
MATERIAL: NICKEL ALLOY A OVERALL
•
HOLE DIAMETER: 0.636 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HARDNESS RATING33.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.079 INCHES MAXIMUM IN
MATERIAL THICKNESS0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH155000 POUNDS PER SQUARE INCH LBS
MATERIALNICKEL ALLOY A OVERALL
HOLE DIAMETER0.636 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 8
2620-709X4PC149Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35338-126Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ANSI B18.21.1Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-W-84Reference document
Same NSN cross-reference
Reference document — Secondary reference
004-003005-007Reference document
Same NSN cross-reference
Reference document — Secondary reference
L312001678Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy M24231/9-013?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24231/9-013?
M24231/9-013 is a WASHER,LOCK.
What parts can replace M24231/9-013?
There are 8 known substitutes for M24231/9-013: 2620-709X4PC149, MS35338-126, ANSI B18.21.1 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M24231/9-013?
M24231/9-013 is cataloged in the U.S. Government catalog under NSN 5310-00-187-2430. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M24231/9-013

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.