PartsTable
Technical Data Sheet

M24231/10-033 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

M24231/10-033: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, thickness: 0.157 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN, hole_diameter: 2.353 INCHES MINIMUM AND 2.363 INCHES MAXIMUM IN, overall_diameter: 4.370 INCHES MINIMUM AND 4.380 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-226-0126, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M24231/10-033
NSN: 5310-01-226-0126
NIINs: 012260126, 014911581
FSC: 5310 — Nuts and Washers
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialNICKEL ALLOY OVERALL
thickness0.157 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
hole_diameter2.353 INCHES MINIMUM AND 2.363 INCHES MAXIMUM IN
overall_diameter4.370 INCHES MINIMUM AND 4.380 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationLOS ANGELES CLASS SSN;CONNECTOR, MUL
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-226-0126
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: M24231/10-033 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
DEPARTURE FROM CITED DOCUMENT: MATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
TECHNICAL CHARACTERISTICS
CRITICALITY CODE JUSTIFICATIONZZZW
DEPARTURE FROM CITED DOCUMENTMATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
SUBSTITUTES & CROSS-REFERENCES 3
M24231/10-033L1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M24231/10-043L1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M24231/10-043Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy M24231/10-033?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24231/10-033?
M24231/10-033 is a WASHER,FLAT.
What parts can replace M24231/10-033?
There are 3 known substitutes for M24231/10-033: M24231/10-033L1, M24231/10-043L1, M24231/10-043. Substitute compatibility should be verified for your specific system.
What is the NSN for M24231/10-033?
M24231/10-033 is cataloged in the U.S. Government catalog under NSN 5310-01-226-0126. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M24231/10-033

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.