PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M24136/2-24

M24136/2-24 — Technical Data Sheet

✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

ADAPTER,STRAIGHT,SWIVEL FLANGE T. Key specifications include material: RUBBER SYNTHETIC TUBE, seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 1.539 INCHES MAXIMUM IN, connection_style: SWIVEL NUT, FLARE (TUBE) STYLE 3 OPTIONAL END FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-019-8976, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M24136/2-24
NSN: 4720-01-019-8976
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter1.539 INCHES MAXIMUM IN
connection_styleSWIVEL NUT, FLARE (TUBE) STYLE 3 OPTIONAL END FIRST END
outside_diameter2.297 INCHES MAXIMUM IN
operating_pressure1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure4000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size3.062 INCHES FIRST END IN
end_item_identificationR.O. UNIT PORT (PIPING 4000 GPD SEAWATER-BRINE-PERM PORT); WSD: LOS ANGELES CLASS SSN (688)
inside_surface_conditionSMOOTH
NSN4720-01-019-8976
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: M24136/2-24 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BURST TEST PRESSURE: 4000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED POLYAMIDE CORD AND 2ND LAYER BRAIDED POLYAMIDE CORD AND 3RD LAYER BRAIDED POLYAMIDE CORD AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
•
OPERATING PRESSURE: 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
INSIDE SURFACE CONDITION: SMOOTH
•
HYDROSTATIC TEST PRESSURE: 2000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
MATERIAL: RUBBER SYNTHETIC TUBE
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON AND WATER, FRESH AND WATER, SALT SINGLE RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
BURST TEST PRESSURE4000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED POLYAMIDE CORD AND 2ND LAYER BRAIDED POLYAMIDE CORD AND 3RD LAYER BRAIDED POLYAMIDE CORD AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
OPERATING PRESSURE1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
INSIDE SURFACE CONDITIONSMOOTH
HYDROSTATIC TEST PRESSURE2000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
MATERIALRUBBER SYNTHETIC TUBE
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON AND WATER, FRESH AND WATER, SALT SINGLE RESPONSE
SPECIFICATION/STANDARD DATA81349-MIL-H-24136/2 GOVERNMENT SPECIFICATION
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
M24136/2-08Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-24136/2Interchangeable
interchangeable cross-reference
interchangeable
0678-002 PC29,3Interchangeable
interchangeable cross-reference
interchangeable
FC133-32Interchangeable
interchangeable cross-reference
interchangeable
M24136/2-32Interchangeable
interchangeable cross-reference
interchangeable
48-00-0547Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M24136/2-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24136/2-24?
M24136/2-24 is a ADAPTER,STRAIGHT,SWIVEL FLANGE T.
What parts can replace M24136/2-24?
There are 23 known substitutes for M24136/2-24: M24136/2-08, MIL-DTL-24136/2, 0678-002 PC29,3 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M24136/2-24?
M24136/2-24 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-019-8976. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M24136/2-24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026