PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M24136/2-20
M24136/2-20 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The M24136/2-20 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-167-4726, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M24136/2-20
NSN: 4720-00-167-4726
FSC: 4720
CAGE: 16236 — DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) (USA)
SPECIFICATIONS
Part NumberM24136/2-20
NSN4720-00-167-4726
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: M24136/2-20 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED TEXTILE YARN AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
EXTERIOR COLOR: BLACK
•
OUTSIDE DIAMETER: 2.020 INCHES NOMINAL IN
•
BURST TEST PRESSURE: 4000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
INSIDE SURFACE CONDITION: SMOOTH
•
NONDEFINITIVE SPEC/STD DATA: 20 SIZE
•
OPERATING PRESSURE: 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON AND WATER, SALT SINGLE RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED TEXTILE YARN AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
EXTERIOR COLORBLACK
OUTSIDE DIAMETER2.020 INCHES NOMINAL IN
BURST TEST PRESSURE4000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
INSIDE SURFACE CONDITIONSMOOTH
NONDEFINITIVE SPEC/STD DATA20 SIZE
OPERATING PRESSURE1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON AND WATER, SALT SINGLE RESPONSE
SPECIAL FEATURESWEAPON SYSTEM ESSENTIAL
HYDROSTATIC TEST PRESSURE2000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
M24136/2-08Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-24136/2Interchangeable
interchangeable cross-reference
interchangeable
0678-002 PC29,3Interchangeable
interchangeable cross-reference
interchangeable
D220Interchangeable
interchangeable cross-reference
interchangeable
FC133-32Interchangeable
interchangeable cross-reference
interchangeable
M24136/2-32Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M24136/2-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24136/2-20?
M24136/2-20 is a M24136/2-20.
What parts can replace M24136/2-20?
There are 26 known substitutes for M24136/2-20: M24136/2-08, MIL-DTL-24136/2, 0678-002 PC29,3 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M24136/2-20?
M24136/2-20 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-167-4726. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M24136/2-20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026