PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M24135/5-10
M24135/5-10 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The M24135/5-10 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-929-1091, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M24135/5-10
NSN: 4720-00-929-1091
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM24135/5-10
NSN4720-00-929-1091
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: M24135/5-10 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATURES PROVIDED: PERFORATED OUTER COVER
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
BURST TEST PRESSURE: 11000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
OUTSIDE DIAMETER: 1.094 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC TUBE
•
OPERATING PRESSURE: 2750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
MEDIA FOR WHICH DESIGNED: AIR AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
INSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDPERFORATED OUTER COVER
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
BURST TEST PRESSURE11000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
OUTSIDE DIAMETER1.094 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC TUBE
OPERATING PRESSURE2750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
MEDIA FOR WHICH DESIGNEDAIR AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE
INSIDE SURFACE CONDITIONSMOOTH
HYDROSTATIC TEST PRESSURE5500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
OUTER COVERING ENVIRONMENTAL PROTECTIONCOLD RESISTANT AND OIL RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
1529-6Interchangeable
interchangeable cross-reference
interchangeable
MIL-H-24135/5Interchangeable
interchangeable cross-reference
interchangeable
4179-6Interchangeable
interchangeable cross-reference
interchangeable
1529-4Interchangeable
interchangeable cross-reference
interchangeable
2771Interchangeable
IBM 2-line PCI WAN Modem
interchangeable
AE371-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M24135/5-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24135/5-10?
M24135/5-10 is a M24135/5-10.
What parts can replace M24135/5-10?
There are 16 known substitutes for M24135/5-10: 1529-6, MIL-H-24135/5, 4179-6 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M24135/5-10?
M24135/5-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-929-1091. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M24135/5-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026