PartsTable
Technical Data Sheet
Download PDF

M2248-1 — ROD,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M2248-1: ROD,STRAIGHT,HEADLESS.

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include hole_diameter: 0.333 INCHES LOCATION NOT OTHERWISE SPECIFIED IN, chamfer_length: 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 14.280 INCHES NOMINAL IN, overall_diameter: 1.2486 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, drilled_hole_location: BOTH ENDS. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-004-6746, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M2248-1
NSN: 5340-01-004-6746
FSC: 5340 — Hardware, Commercial
CAGE: 6K4C8 — GOODRICH CORPORATION (USA)
SPECIFICATIONS
hole_diameter0.333 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
chamfer_length0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_length14.280 INCHES NOMINAL IN
overall_diameter1.2486 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
drilled_hole_locationBOTH ENDS
distance_from_end_to_hole_center0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-004-6746
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M2248-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 1.2486 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
•
DRILLED HOLE LOCATION: BOTH ENDS
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
HOLE DIAMETER: 0.333 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
•
DISTANCE FROM END TO HOLE CENTER: 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER1.2486 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
DRILLED HOLE LOCATIONBOTH ENDS
OVERALL LENGTH14.280 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
HOLE DIAMETER0.333 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
DISTANCE FROM END TO HOLE CENTER0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy M2248-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M2248-1?
M2248-1 is a ROD,STRAIGHT,HEADLESS.
What is the NSN for M2248-1?
M2248-1 is cataloged in the U.S. Government catalog under NSN 5340-01-004-6746. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M2248-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.