PartsTable
Technical Data Sheet

M22/09-00101SD — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

M22/09-00101SD: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 2.030 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN, actuator_type: SINGLE SHAFT, body_diameter: 4.060 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-960-2493, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ M22/09-00101SD
NSN: 5905-00-960-2493
FSC: 5905 — Resistor
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length2.030 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
shaft_length0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
body_diameter4.060 INCHES MAXIMUM IN
overall_length2.952 INCHES MAXIMUM IN
shaft_diameter0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
mounting_methodSTANDARD BUSHING
overall_diameter4.470 INCHES MAXIMUM IN
section_quantity1
terminal_locationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
NSN5905-00-960-2493
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN M22/09-00101SD MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
NONTURN DEVICE LOCATION: AT 12 OCLOCK
•
BODY DIAMETER: 4.060 INCHES MAXIMUM IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 15.0 OHMS SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 390.0 SINGLE SECTION
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
•
NONTURN DEVICE RADIUS: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
NONTURN DEVICE LOCATIONAT 12 OCLOCK
BODY DIAMETER4.060 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION15.0 OHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER390.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
NONTURN DEVICE RADIUS0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
BODY STYLECYLINDRICAL BUSHING MOUNTED
OVERALL DIAMETER4.470 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 5
RP301SD150KKReference document
Same NSN cross-reference
Reference document — Secondary reference
A030041AReference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
MILR22-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
030041Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
MIL-PRF-22/9Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy M22/09-00101SD?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M22/09-00101SD?
M22/09-00101SD is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace M22/09-00101SD?
There are 5 known substitutes for M22/09-00101SD: RP301SD150KK, A030041A, MILR22-9 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M22/09-00101SD?
M22/09-00101SD is cataloged in the U.S. Government catalog under NSN 5905-00-960-2493. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M22/09-00101SD