M22/09-00011FD — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

M22/09-00011FD: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 2.030 INCHES NOMINAL IN, flat_height: 0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN, shaft_style: ROUND, FLATTED, shaft_length: 0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN, actuator_type: SINGLE SHAFT. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-810-0700, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ M22/09-00011FD

NSN: 5905-00-810-0700
FSC: 5905 — Resistor
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	2.030 INCHES NOMINAL IN
flat_height	0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
shaft_style	ROUND, FLATTED
shaft_length	0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN
actuator_type	SINGLE SHAFT
body_diameter	4.060 INCHES NOMINAL IN
overall_length	2.952 INCHES NOMINAL IN
shaft_diameter	0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
mounting_method	LOCKING BUSHING
overall_diameter	4.470 INCHES NOMINAL IN
section_quantity	1
NSN	5905-00-810-0700

COMPONENT DIAGRAM

KEY FEATURES

•

NONTURN DEVICE LOCATION: AT 12 OCLOCK

•

BODY DIAMETER: 4.060 INCHES NOMINAL IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

ELECTRICAL RESISTANCE PER SECTION: 2.0 OHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 390.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN

•

NONTURN DEVICE RADIUS: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

NONTURN DEVICE LOCATION	AT 12 OCLOCK
BODY DIAMETER	4.060 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH	32.0
ELECTRICAL RESISTANCE PER SECTION	2.0 OHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	390.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
NONTURN DEVICE RADIUS	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
BODY STYLE	CYLINDRICAL BUSHING MOUNTED
OVERALL DIAMETER	4.470 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 4

4D141Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MIL-PRF-22/9Reference document

Same NSN cross-reference

Reference document — Identification reference

MIL-R-22/9Reference document

Same NSN cross-reference

Reference document — Secondary reference

RP301FD2R0KKReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy M22/09-00011FD?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M22/09-00011FD?

M22/09-00011FD is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace M22/09-00011FD?

There are 4 known substitutes for M22/09-00011FD: 4D141, MIL-PRF-22/9, MIL-R-22/9 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for M22/09-00011FD?

M22/09-00011FD is cataloged in the U.S. Government catalog under NSN 5905-00-810-0700. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M22/09-00011FD — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — M22/09-00011FD