M22/04-00091SH — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

M22/04-00091SH: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 1.750 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 1.500 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 1.880 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-023-6681, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ M22/04-00091SH

NSN: 5905-00-023-6681
FSC: 5905 — Resistor
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	1.750 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
shaft_length	1.500 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
body_diameter	1.880 INCHES MAXIMUM IN
overall_length	3.812 INCHES MAXIMUM IN
shaft_diameter	0.250 INCHES NOMINAL IN
mounting_method	STANDARD BUSHING
overall_diameter	1.880 INCHES MAXIMUM IN
section_quantity	1
terminal_location	REAR END LOCATION NOT OTHERWISE SPECIFIED
NSN	5905-00-023-6681

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 4.00 INCH-OUNCES IN

•

NONTURN DEVICE LOCATION: AT 12 OCLOCK

•

BODY DIAMETER: 1.880 INCHES MAXIMUM IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

ELECTRICAL RESISTANCE PER SECTION: 25.0 OHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 340.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.250 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	4.00 INCH-OUNCES IN
NONTURN DEVICE LOCATION	AT 12 OCLOCK
BODY DIAMETER	1.880 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH	32.0
ELECTRICAL RESISTANCE PER SECTION	25.0 OHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	340.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.250 INCHES NOMINAL IN
NONTURN DEVICE RADIUS	0.500 INCHES NOMINAL IN
BODY STYLE	CYLINDRICAL BUSHING MOUNTED

SUBSTITUTES & CROSS-REFERENCES 4

RP111SG250KKReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

RP111SH250KKReference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-PRF-22/4Reference document

Same NSN cross-reference

Reference document — Identification reference

MILR22-4Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy M22/04-00091SH?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M22/04-00091SH?

M22/04-00091SH is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace M22/04-00091SH?

There are 4 known substitutes for M22/04-00091SH: RP111SG250KK, RP111SH250KK, MIL-PRF-22/4 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for M22/04-00091SH?

M22/04-00091SH is cataloged in the U.S. Government catalog under NSN 5905-00-023-6681. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M22/04-00091SH — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — M22/04-00091SH