PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M20708/78-02C
M20708/78-02C ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The M20708/78-02C is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5990-01-013-4569, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M20708/78-02C
NSN: 5990-01-013-4569
FSC: 5990
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
Part NumberM20708/78-02C
NSN5990-01-013-4569
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available M20708/78-02C TITLE COMPONENT PN M20708/78-02C MFR M20708/78-02C
KEY FEATURES
•
SHAFT DIAMETER: 0.0900 INCHES MAXIMUM SINGLE SHAFT IN
•
ZSS IMPEDANCE MAGNITUDE IN OHMS: 11.00 MINIMUM AND 15.00 MAXIMUM
•
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT: 30.00
•
ROTOR INPUT VOLTAGE RATING IN VOLTS: 26.0 NOMINAL
•
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES: -7.0 TO 7.0
•
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS: 0.04 INCH-OUNCES NOMINAL IN
•
SHAFT SLOT WIDTH: 0.0200 INCHES NOMINAL SINGLE SHAFT IN
•
TRANSFORMATION RATIO: 0.454 ROTOR TO STATOR NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
SHAFT DIAMETER0.0900 INCHES MAXIMUM SINGLE SHAFT IN
ZSS IMPEDANCE MAGNITUDE IN OHMS11.00 MINIMUM AND 15.00 MAXIMUM
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT30.00
ROTOR INPUT VOLTAGE RATING IN VOLTS26.0 NOMINAL
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES-7.0 TO 7.0
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS0.04 INCH-OUNCES NOMINAL IN
SHAFT SLOT WIDTH0.0200 INCHES NOMINAL SINGLE SHAFT IN
TRANSFORMATION RATIO0.454 ROTOR TO STATOR NOMINAL
BODY STYLESTANDARD ROUND A
UNDERCUT DIAMETER0.6870 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
M20708/78-01CInterchangeable
interchangeable cross-reference
interchangeable
AS20708/78Interchangeable
interchangeable cross-reference
interchangeable
128913Interchangeable
interchangeable cross-reference
interchangeable
MIL-S-20708/78Interchangeable
Same NIIN cross-reference
interchangeable
M20708/78D-002Interchangeable
Same NIIN cross-reference
interchangeable
SAE-AS20708/78Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M20708/78-02C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M20708/78-02C?
M20708/78-02C is a M20708/78-02C.
What parts can replace M20708/78-02C?
There are 7 known substitutes for M20708/78-02C: M20708/78-01C, AS20708/78, 128913 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M20708/78-02C?
M20708/78-02C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5990-01-013-4569. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M20708/78-02C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026