PartsTable
Technical Data Sheet
Download PDF

M203SSTX88 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

M203SSTX88: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC RETAINER, bore_shape: STRAIGHT, bore_diameter: 0.6692 INCHES NOMINAL IN, overall_width: 0.4692 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-126-7590, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M203SSTX88
NSN: 3110-01-126-7590
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC PHENOLIC RETAINER
bore_shapeSTRAIGHT
bore_diameter0.6692 INCHES NOMINAL IN
overall_width0.4692 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
features_providedALIGNING RING
internal_clearance0.0025 INCHES MINIMUM RADIAL AND 0.0030 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
end_item_identificationACFT ENG F-107
NSN3110-01-126-7590
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M203SSTX88 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0025 INCHES MINIMUM RADIAL AND 0.0030 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 1.5747 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0025 INCHES MINIMUM RADIAL AND 0.0030 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.4692 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.5747 INCHES NOMINAL IN
FEATURES PROVIDEDALIGNING RING
BORE SHAPESTRAIGHT
SUBSTITUTES & CROSS-REFERENCES 2
M203SSTX99Reference document
Same NSN cross-reference
Reference document — Secondary reference
34993Same NSN cross-reference
34993
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy M203SSTX88?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M203SSTX88?
M203SSTX88 is a BEARING,BALL,ANNULAR.
What parts can replace M203SSTX88?
There are 2 known substitutes for M203SSTX88: M203SSTX99, 34993. Substitute compatibility should be verified for your specific system.
What is the NSN for M203SSTX88?
M203SSTX88 is cataloged in the U.S. Government catalog under NSN 3110-01-126-7590. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M203SSTX88