PartsTable / COMPONENT / M1P46
M1P46
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.750 INCHES NOMINAL IN, overall_length: 5.500 INCHES NOMINAL IN, cross-sectional_thickness: 0.019 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-980-9007, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
M1P46
NSN: 5330-00-980-9007 FSC: 5330 CAGE: 08820 — BROS INC
SPECIFICATIONS
material CELLULOSE OVERALL hole_diameter 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 3.750 INCHES NOMINAL IN overall_length 5.500 INCHES NOMINAL IN bolt_hole_quantity 6 cross-sectional_thickness 0.019 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION material_document_and_classification BW-239-M,FSCM 06853 MFR REF SINGLE MATERIAL RESPONSE OVERALL NSN 5330-00-980-9007
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: M1P46
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• MATERIAL: CELLULOSE OVERALL
• MATERIAL DOCUMENT AND CLASSIFICATION: BW-239-M,FSCM 06853 MFR REF SINGLE MATERIAL RESPONSE OVERALL
• CROSS-SECTIONAL THICKNESS: 0.019 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION OVERALL WIDTH 3.750 INCHES NOMINAL IN HOLE DIAMETER 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN OVERALL LENGTH 5.500 INCHES NOMINAL IN MATERIAL CELLULOSE OVERALL MATERIAL DOCUMENT AND CLASSIFICATION BW-239-M,FSCM 06853 MFR REF SINGLE MATERIAL RESPONSE OVERALL BOLT HOLE QUANTITY 6 CROSS-SECTIONAL THICKNESS 0.019 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
75149 Interchangeable interchangeable cross-reference
interchangeable
15149 Interchangeable interchangeable cross-reference
interchangeable
6515NCM104813 Interchangeable interchangeable cross-reference
interchangeable
202.898 Interchangeable interchangeable cross-reference
interchangeable
17118 Interchangeable interchangeable cross-reference
interchangeable
14040494-9 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy M1P46?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M1P46?
M1P46 is a GASKET.
What parts can replace M1P46?
There are 9 known substitutes for M1P46: 75149, 15149, 6515NCM104813 and 6 more. Substitute compatibility should be verified for your specific system.
Is M1P46 still available?
M1P46 is currently cancelled.