PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M19537
M19537 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.688 INCHES NOMINAL IN, overall_length: 1.688 INCHES NOMINAL IN, style_designator: CURVED ARCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-4175, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M19537
NSN: 5340-00-286-4175
FSC: 5340
CAGE: 28873 — ITW FOOD EQUIPMENT GROUP LLC DBA HOBART SERVICE (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.688 INCHES NOMINAL IN
overall_length1.688 INCHES NOMINAL IN
style_designatorCURVED ARCH
surface_treatmentZINC
material_thickness0.063 INCHES NOMINAL IN
mounting_hole_size0.563 INCHES NOMINAL IN
inside_diameter/arch_length0.625 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.500 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole0.875 INCHES NOMINAL IN
NSN5340-00-286-4175
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M19537 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER/ARCH LENGTH: 0.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CURVED ARCH
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
SURFACE TREATMENT: ZINC
•
MOUNTING HOLE SIZE: 0.563 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH1.688 INCHES NOMINAL IN
INSIDE DIAMETER/ARCH LENGTH0.625 INCHES NOMINAL IN
STYLE DESIGNATORCURVED ARCH
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
SURFACE TREATMENTZINC
OVERALL WIDTH0.688 INCHES NOMINAL IN
MOUNTING HOLE SIZE0.563 INCHES NOMINAL IN
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
CUSHIONNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
PIDODP30Interchangeable
interchangeable cross-reference
interchangeable
J367Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M19537?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M19537?
M19537 is a STRAP,RETAINING.
What parts can replace M19537?
There are 2 known substitutes for M19537: PIDODP30, J367. Substitute compatibility should be verified for your specific system.
What is the NSN for M19537?
M19537 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-4175. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M19537

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026