PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M18180/1-012A01A
M18180/1-012A01A ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The M18180/1-012A01A is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-193-6968, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M18180/1-012A01A
NSN: 4730-00-193-6968
FSC: 4730
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM18180/1-012A01A
NSN4730-00-193-6968
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: M18180/1-012A01A · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THICKNESS: 0.938 INCHES NOMINAL IN
•
RAISED FACE DIAMETER: 8.500 INCHES NOMINAL IN
•
FACE SEATING SURFACE CONDITION: MACHINED
•
MATERIAL: STEEL
•
SPECIFICATION/STANDARD DATA: 80204-B16.5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
NONDEFINITIVE SPEC/STD DATA: 14 TABLE
•
STYLE DESIGNATOR: ROUND, ONE BOLT HOLE CIRCLE
TECHNICAL CHARACTERISTICS (FLIS)
THICKNESS0.938 INCHES NOMINAL IN
RAISED FACE DIAMETER8.500 INCHES NOMINAL IN
FACE SEATING SURFACE CONDITIONMACHINED
MATERIALSTEEL
SPECIAL FEATURESCONFORM TO ASA STANDARD B16.5
SPECIFICATION/STANDARD DATA80204-B16.5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATA14 TABLE
STYLE DESIGNATORROUND, ONE BOLT HOLE CIRCLE
OPERATING PRESSURE AND TYPE150.0 POUNDS PER SQUARE INCH (PSI) STEAM MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) GAS MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) OIL MAXIMUM REQUIRED AND 150.0 POUNDS PER SQUARE INCH (PSI) WATER MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
FLANGE SECTION STYLERAISED FACE, WELDING NECK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
568Interchangeable
interchangeable cross-reference
interchangeable
259659R91Interchangeable
interchangeable cross-reference
interchangeable
P4508Interchangeable
interchangeable cross-reference
interchangeable
5616Interchangeable
interchangeable cross-reference
interchangeable
5-686Interchangeable
interchangeable cross-reference
interchangeable
SIJ2-2472Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M18180/1-012A01A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M18180/1-012A01A?
M18180/1-012A01A is a M18180/1-012A01A.
What parts can replace M18180/1-012A01A?
There are 29 known substitutes for M18180/1-012A01A: 568, 259659R91, P4508 and 26 more. Substitute compatibility should be verified for your specific system.
Is M18180/1-012A01A still available?
M18180/1-012A01A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M18180/1-012A01A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026