Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL, inner_groove_depth: 0.375 INCHES NOMINAL IN, inner_groove_width: 0.250 INCHES NOMINAL IN, peripheral_diameter: 5.188 INCHES NOMINAL IN, center_hole_diameter: 4.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System under NSN 5330-01-028-5739, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
M16377/60-004
NSN:5330-01-028-5739 FSC:5330 CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
material
RUBBER CHLOROPRENE CLASS CR OVERALL
hardness_rating
45.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
inner_groove_depth
0.375 INCHES NOMINAL IN
inner_groove_width
0.250 INCHES NOMINAL IN
peripheral_diameter
5.188 INCHES NOMINAL IN
center_hole_diameter
4.188 INCHES NOMINAL IN
cross-sectional_height
0.500 INCHES NOMINAL IN
cross-sectional_shape_style
SPECIAL
NSN
5330-01-028-5739
COMPONENT DIAGRAM
KEY FEATURES
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CENTER HOLE DIAMETER: 4.188 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
INNER GROOVE DEPTH: 0.375 INCHES NOMINAL IN
•
INNER GROOVE WIDTH: 0.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 5.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
TECHNICAL CHARACTERISTICS
HARDNESS RATING
45.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M16377/60-004?
M16377/60-004 is a PACKING,PREFORMED.
What parts can replace M16377/60-004?
There are 11 known substitutes for M16377/60-004: 7D3-07765 ITEM 14, P-1971-S, 5667 RED CASE HARDENED and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M16377/60-004?
M16377/60-004 is cataloged in the Federal Logistics Information System under NSN 5330-01-028-5739. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.