PartsTable
Technical Data Sheet
Download PDF

M1482T — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M1482T: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.562 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), surface_treatment: ZINC OVERALL, loop/holding_dimension: 0.625 INCHES NOMINAL IN, material_document_and_classification: JDMA 4-2S,JOHN DEERE AND CO MFR REF SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-185-3566, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M1482T
NSN: 5340-01-185-3566
FSC: 5340 — Hardware, Commercial
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.562 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentZINC OVERALL
loop/holding_dimension0.625 INCHES NOMINAL IN
material_document_and_classificationJDMA 4-2S,JOHN DEERE AND CO MFR REF SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationDTW 765,JOHN DEERE AND CO MFR REF SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-185-3566
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M1482T MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: DTW 765,JOHN DEERE AND CO MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: JDMA 4-2S,JOHN DEERE AND CO MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.625 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONDTW 765,JOHN DEERE AND CO MFR REF SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONJDMA 4-2S,JOHN DEERE AND CO MFR REF SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.625 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.562 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy M1482T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M1482T?
M1482T is a CLIP,SPRING TENSION.
What is the NSN for M1482T?
M1482T is cataloged in the U.S. Government catalog under NSN 5340-01-185-3566. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M1482T

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.