PartsTable
Technical Data Sheet
Download PDF

M1252-137010 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M1252-137010: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.500 INCHES NOMINAL IN, first_leg_length: 0.695 INCHES MINIMUM AND 0.705 INCHES MAXIMUM IN, second_leg_style: END RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-005-0574, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M1252-137010
NSN: 5340-01-005-0574
FSC: 5340 — Hardware, Commercial
CAGE: A196N — FORSVARETS MATERIELVERK (SWE)
SPECIFICATIONS
materialSTEEL COMP 321
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.500 INCHES NOMINAL IN
first_leg_length0.695 INCHES MINIMUM AND 0.705 INCHES MAXIMUM IN
second_leg_styleEND RADIUS
second_leg_width0.500 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length0.975 INCHES MINIMUM AND 0.985 INCHES MAXIMUM IN
first_leg_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
first_leg_end_radius0.500 INCHES NOMINAL IN
second_leg_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
NSN5340-01-005-0574
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M1252-137010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.225 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 0.500 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 0.975 INCHES MINIMUM AND 0.985 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.225 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
SECOND LEG HOLE DIAMETER0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
SECOND LEG WIDTH0.500 INCHES NOMINAL IN
SECOND LEG LENGTH0.975 INCHES MINIMUM AND 0.985 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
SAE-AS9593Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS9593-126Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy M1252-137010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M1252-137010?
M1252-137010 is a BRACKET,ANGLE.
What parts can replace M1252-137010?
There are 2 known substitutes for M1252-137010: SAE-AS9593, MS9593-126. Substitute compatibility should be verified for your specific system.
What is the NSN for M1252-137010?
M1252-137010 is cataloged in the U.S. Government catalog under NSN 5340-01-005-0574. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M1252-137010

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.