PartsTable
Technical Data Sheet
Download PDF

M1222SN10C250TANN — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

M1222SN10C250TANN: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, thread_class: 2A A, thread_length: 3.120 INCHES NOMINAL IN, fastener_length: 3.120 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, nominal_thread_diameter: 0.620 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-596-5174, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M1222SN10C250TANN
NSN: 5305-01-596-5174
FSC: 5305 — Screws
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialTITANIUM ALLOY OVERALL
thread_class2A A
thread_length3.120 INCHES NOMINAL IN
fastener_length3.120 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_diameter0.620 INCHES IN
thread_quantity_per_inch11
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-596-5174
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: M1222SN10C250TANN · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 3.120 INCHES NOMINAL IN
•
THREAD LENGTH: 3.120 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.620 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 2A A
•
THREAD QUANTITY PER INCH: 11
•
MATERIAL: TITANIUM ALLOY OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS
FASTENER LENGTH3.120 INCHES NOMINAL IN
THREAD LENGTH3.120 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.620 INCHES IN
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A A
THREAD QUANTITY PER INCH11
MATERIALTITANIUM ALLOY OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SUBSTITUTES & CROSS-REFERENCES 1
MIL-DTL-1222J TYPEIIReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy M1222SN10C250TANN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M1222SN10C250TANN?
M1222SN10C250TANN is a SCREW,CAP,SOCKET HEAD.
What parts can replace M1222SN10C250TANN?
There is 1 known substitute for M1222SN10C250TANN: MIL-DTL-1222J TYPEII. Substitute compatibility should be verified for your specific system.
What is the NSN for M1222SN10C250TANN?
M1222SN10C250TANN is cataloged in the U.S. Government catalog under NSN 5305-01-596-5174. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M1222SN10C250TANN

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.