PartsTable
Technical Data Sheet
PartsTable / MRO / M1174
M1174 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, body_length: 5.000 INCHES NOMINAL IN, bore_diameter: 110.00 MILLIMETERS NOMINAL MM, overall_width: 50.0 MILLIMETERS NOMINAL MM, inclosure_type: ENCASED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6824, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ M1174
NSN: 3110-00-155-6824
FSC: 3110
CAGE: 61208 — TWIN DISC, INCORPORATED DBA TWIN DISC MID-ATLANTIC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
body_length5.000 INCHES NOMINAL IN
bore_diameter110.00 MILLIMETERS NOMINAL MM
overall_width50.0 MILLIMETERS NOMINAL MM
inclosure_typeENCASED
load_directionRADIAL
overall_length6.520 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
features_providedSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
nominal_thread_size0.437 INCHES IN
NSN3110-00-155-6824
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M1174 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 240.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
MATERIAL: STEEL OVERALL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER240.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
MATERIALSTEEL OVERALL
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL OVERALL
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
LOAD DIRECTIONRADIAL
RETAINER FABRICATION METHODPRESSED
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
4132-2Interchangeable
interchangeable cross-reference
interchangeable
HACKTAILInterchangeable
interchangeable cross-reference
interchangeable
160932Interchangeable
interchangeable cross-reference
interchangeable
94420Interchangeable
interchangeable cross-reference
interchangeable
TH3222Interchangeable
interchangeable cross-reference
interchangeable
NAS907 TYFSZ22Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M1174?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M1174?
M1174 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace M1174?
There are 13 known substitutes for M1174: 4132-2, HACKTAIL, 160932 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M1174?
M1174 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6824. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M1174

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026