PartsTable
Technical Data Sheet
Download PDF

M10HH137 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M10HH137: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING SPRING, seal_width: 1.063 INCHES NOMINAL IN, construction: ONE-PIECE, outside_diameter: 6.006 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 6.001 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-090-2107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M10HH137
NSN: 5330-01-090-2107
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING SPRING
seal_width1.063 INCHES NOMINAL IN
constructionONE-PIECE
outside_diameter6.006 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter6.001 INCHES NOMINAL IN
accommodated_shaft_diameter4.625 INCHES NOMINAL IN
NSN5330-01-090-2107
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M10HH137 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 1.063 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 6.006 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 6.001 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 4.625 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS
SEAL WIDTH1.063 INCHES NOMINAL IN
OUTSIDE DIAMETER6.006 INCHES NOMINAL IN
HOUSING BORE DIAMETER6.001 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER4.625 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
MATERIALSTEEL CORROSION RESISTING SPRING
CONSTRUCTIONONE-PIECE
SUBSTITUTES & CROSS-REFERENCES 8
46305Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A-1205-P-1212Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1205P1212Reference document
Same NSN cross-reference
Reference document — Secondary reference
B370025BG2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
22025Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
B370025BG1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy M10HH137?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M10HH137?
M10HH137 is a SEAL,PLAIN.
What parts can replace M10HH137?
There are 8 known substitutes for M10HH137: 46305, A-1205-P-1212, 1205P1212 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M10HH137?
M10HH137 is cataloged in the U.S. Government catalog under NSN 5330-01-090-2107. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M10HH137

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.