PartsTable
Technical Data Sheet
Download PDF

M108HX14D — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

M108HX14D: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_diameter: 1.5748 INCHES NOMINAL IN, overall_width: 1.1811 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND, style_designator: UNIVERSAL GROUND FACES, LOADING GROOVE, NON-SEPARABLE. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-151-0766, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M108HX14D
NSN: 3110-01-151-0766
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_diameter1.5748 INCHES NOMINAL IN
overall_width1.1811 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorUNIVERSAL GROUND FACES, LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter2.6772 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-01-151-0766
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M108HX14D · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: UNIVERSAL GROUND FACES, LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 2.6772 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
BORE DIAMETER: 1.5748 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 4340 RETAINER
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STYLE DESIGNATORUNIVERSAL GROUND FACES, LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH1.1811 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.6772 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
BORE DIAMETER1.5748 INCHES NOMINAL IN
MATERIALSTEEL COMP 4340 RETAINER
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
SUBSTITUTES & CROSS-REFERENCES 2
10107533Reference document
Same NSN cross-reference
Reference document — Informative reference only
4054T12P03Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy M108HX14D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M108HX14D?
M108HX14D is a BEARING,BALL,DUPLEX.
What parts can replace M108HX14D?
There are 2 known substitutes for M108HX14D: 10107533, 4054T12P03. Substitute compatibility should be verified for your specific system.
What is the NSN for M108HX14D?
M108HX14D is cataloged in the U.S. Government catalog under NSN 3110-01-151-0766. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M108HX14D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.