PartsTable / O-RING / M107-218
M107-218
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 0.305 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN, center_hole_diameter: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-248-3833, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
M107-218
NSN: 5331-00-248-3833 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR outside_diameter 0.305 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN center_hole_diameter 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN cross-sectional_height 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN NSN 5331-00-248-3833
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: M107-218
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 0.305 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATION W/S: L.P. COMPRESSORS; AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130); ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); RADAR SET AN/TPN-18; FIRE CONTROL SYSTEM, MISSILE MK 74 (FCS); ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H); FIRE CONTROL SYSTEM, MK 92 (FCS); AIR COMPRESSORS, HIGH PRESSURE; MAIN FEED PUMPS MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN OUTSIDE DIAMETER 0.305 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN CENTER HOLE DIAMETER 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
0509 Interchangeable interchangeable cross-reference
interchangeable
00509 Interchangeable interchangeable cross-reference
interchangeable
00508 Interchangeable interchangeable cross-reference
interchangeable
R1393P005 Interchangeable interchangeable cross-reference
interchangeable
R1393 Interchangeable interchangeable cross-reference
interchangeable
100706 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy M107-218?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M107-218?
M107-218 is a O-RING.
What parts can replace M107-218?
There are 25 known substitutes for M107-218: 0509, 00509, 00508 and 22 more. Substitute compatibility should be verified for your specific system.
Is M107-218 still available?
M107-218 is currently cancelled.
Request a Quote — M107-218