PartsTable
Technical Data Sheet
Download PDF

M100HX76 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

M100HX76: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP M50 SEPARATOR SLUG, bore_shape: STRAIGHT, bore_diameter: 0.3937 INCHES NOMINAL IN, contact_angle: 16.0 DEGREES NOMINAL, overall_width: 0.3150 INCHES NOMINAL IN, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-009-8142, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M100HX76
NSN: 3110-01-009-8142
NIINs: 010098142, 010189395
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP M50 SEPARATOR SLUG
bore_shapeSTRAIGHT
bore_diameter0.3937 INCHES NOMINAL IN
contact_angle16.0 DEGREES NOMINAL
overall_width0.3150 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
style_designatorLOADING GROOVE, NON-SEPARABLE
internal_clearance0.0009 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN
overall_outside_diameter1.0236 INCHES NOMINAL IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.7
NSN3110-01-009-8142
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M100HX76 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL CLEARANCE: 0.0009 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 1.0236 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
CONTACT ANGLE: 16.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL CLEARANCE0.0009 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.3150 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.0236 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
CONTACT ANGLE16.0 DEGREES NOMINAL
LOAD DIRECTIONANGULAR
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONPRIMARILY RADIAL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy M100HX76?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M100HX76?
M100HX76 is a BEARING,BALL,ANNULAR.
What is the NSN for M100HX76?
M100HX76 is cataloged in the U.S. Government catalog under NSN 3110-01-009-8142. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M100HX76

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.