PartsTable
Technical Data Sheet
Download PDF

M10-215-08-S-C — MOUNT,RESILIENT,UTILITY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M10-215-08-S-C: MOUNT,RESILIENT,UTILITY.

The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include height: 2.11 INCHES MINIMUM AND 2.19 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING BASE PLATE, thread_size: 1/4-20 ALL THREADED PORTIONS, style_designator: RECTANGULAR W/WIRE ROPE, surface_treatment: PASSIVATE BASE PLATE, material_document_and_classification: 300 SERIES STAINLESS STEEL MFR REF SINGLE MATERIAL RESPONSE BASE PLATE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-665-6455, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M10-215-08-S-C
NSN: 5340-01-665-6455
FSC: 5340 — Hardware, Commercial
CAGE: 07QQ7 — ISOLATION DYNAMICS CORPORATION (USA)
SPECIFICATIONS
height2.11 INCHES MINIMUM AND 2.19 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING BASE PLATE
thread_size1/4-20 ALL THREADED PORTIONS
style_designatorRECTANGULAR W/WIRE ROPE
surface_treatmentPASSIVATE BASE PLATE
material_document_and_classification300 SERIES STAINLESS STEEL MFR REF SINGLE MATERIAL RESPONSE BASE PLATE
distance_between_mounting_hole_centers5.160 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencySHOCK & VIBRATION ISOLATOR
surface_treatment_document_and_classificationQQ-P-35C,TYPE II FED SPEC SINGLE TREATMENT RESPONSE BASE PLATE
NSN5340-01-665-6455
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M10-215-08-S-C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35C,TYPE II FED SPEC SINGLE TREATMENT RESPONSE BASE PLATE
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 5.160 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR W/WIRE ROPE
•
MATERIAL DOCUMENT AND CLASSIFICATION: 300 SERIES STAINLESS STEEL MFR REF SINGLE MATERIAL RESPONSE BASE PLATE
•
HEIGHT: 2.11 INCHES MINIMUM AND 2.19 INCHES MAXIMUM IN
•
THREAD SIZE: 1/4-20 ALL THREADED PORTIONS
•
SURFACE TREATMENT: PASSIVATE BASE PLATE
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35C,TYPE II FED SPEC SINGLE TREATMENT RESPONSE BASE PLATE
DISTANCE BETWEEN MOUNTING HOLE CENTERS5.160 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR W/WIRE ROPE
MATERIAL DOCUMENT AND CLASSIFICATION300 SERIES STAINLESS STEEL MFR REF SINGLE MATERIAL RESPONSE BASE PLATE
HEIGHT2.11 INCHES MINIMUM AND 2.19 INCHES MAXIMUM IN
THREAD SIZE1/4-20 ALL THREADED PORTIONS
SURFACE TREATMENTPASSIVATE BASE PLATE
PART NAME ASSIGNED BY CONTROLLING AGENCYSHOCK & VIBRATION ISOLATOR
MATERIALSTEEL CORROSION RESISTING BASE PLATE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy M10-215-08-S-C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M10-215-08-S-C?
M10-215-08-S-C is a MOUNT,RESILIENT,UTILITY.
What is the NSN for M10-215-08-S-C?
M10-215-08-S-C is cataloged in the U.S. Government catalog under NSN 5340-01-665-6455. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M10-215-08-S-C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.