PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M010N
M010N ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 0.7500 INCHES NOMINAL IN, overall_width: 0.6250 INCHES NOMINAL IN, alignment_type: RIGID, style_designator: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND, overall_outside_diameter: 1.1250 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4365, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M010N
NSN: 3110-00-120-4365
FSC: 3110
CAGE: 92563 — MCGILL MANUFACTURING CO, INC (USA)
SPECIFICATIONS
bore_diameter0.7500 INCHES NOMINAL IN
overall_width0.6250 INCHES NOMINAL IN
alignment_typeRIGID
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
overall_outside_diameter1.1250 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-120-4365
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M010N · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
OVERALL OUTSIDE DIAMETER: 1.1250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.7500 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
OVERALL WIDTH0.6250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.1250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
7133Interchangeable
interchangeable cross-reference
interchangeable
983485-2Interchangeable
interchangeable cross-reference
interchangeable
606013Interchangeable
interchangeable cross-reference
interchangeable
71332Interchangeable
interchangeable cross-reference
interchangeable
1207369Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M010N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M010N?
M010N is a BEARING,ROLLER,NEEDLE.
What parts can replace M010N?
There are 21 known substitutes for M010N: 7133, 983485-2, 606013 and 18 more. Substitute compatibility should be verified for your specific system.
Is M010N still available?
M010N is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M010N

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026