PartsTable
Technical Data Sheet
Download PDF

M-4923-C — BEARING,ROLLER,CYLINDRICAL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

M-4923-C: BEARING,ROLLER,CYLINDRICAL.

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 4.4992 INCHES MINIMUM AND 4.5000 INCHES MAXIMUM IN, overall_width: 5.9920 INCHES MINIMUM AND 6.0000 INCHES MAXIMUM IN, surface_finish: GROUND, locating_feature: NONLOCATING. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-120-8209, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M-4923-C
NSN: 3110-01-120-8209
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter4.4992 INCHES MINIMUM AND 4.5000 INCHES MAXIMUM IN
overall_width5.9920 INCHES MINIMUM AND 6.0000 INCHES MAXIMUM IN
surface_finishGROUND
locating_featureNONLOCATING
special_featuresTWO RETAINING RINGS ON INNER RING; INNER RING ID GROOVED; OIL HOLE THRU INNER RING
style_designatorCYLINDRICAL INNER RING, TWO LIP OUTER RING W/CENTRAL ROLLER GUIDE, SEPARABLE
overall_outside_diameter13.9900 INCHES MINIMUM AND 14.0100 INCHES MAXIMUM IN
standard_tolerance_designationRBEC NO.1
NSN3110-01-120-8209
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M-4923-C · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOCATING FEATURE: NONLOCATING
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: CYLINDRICAL INNER RING, TWO LIP OUTER RING W/CENTRAL ROLLER GUIDE, SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 13.9900 INCHES MINIMUM AND 14.0100 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
TECHNICAL CHARACTERISTICS
LOCATING FEATURENONLOCATING
SURFACE FINISHGROUND
STYLE DESIGNATORCYLINDRICAL INNER RING, TWO LIP OUTER RING W/CENTRAL ROLLER GUIDE, SEPARABLE
OVERALL WIDTH5.9920 INCHES MINIMUM AND 6.0000 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER13.9900 INCHES MINIMUM AND 14.0100 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
SPECIAL FEATURESTWO RETAINING RINGS ON INNER RING; INNER RING ID GROOVED; OIL HOLE THRU INNER RING
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
BORE DIAMETER4.4992 INCHES MINIMUM AND 4.5000 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
225560Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy M-4923-C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M-4923-C?
M-4923-C is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace M-4923-C?
There is 1 known substitute for M-4923-C: 225560. Substitute compatibility should be verified for your specific system.
What is the NSN for M-4923-C?
M-4923-C is cataloged in the U.S. Government catalog under NSN 3110-01-120-8209. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M-4923-C