PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M-471-OH
M-471-OH ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.4375 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE IN OUTER RACE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-8878, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M-471-OH
NSN: 3110-00-293-8878
FSC: 3110
CAGE: 5XMS1 — JTEKT BEARINGS NORTH AMERICA LLC DIV KBNA - ORD 1 (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.4375 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE IN OUTER RACE
style_designatorNON-SEPARABLE, CLOSED END, DRAWN SHELL
overall_outside_diameter0.4375 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-293-8878
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M-471-OH · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.2500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OVERALL OUTSIDE DIAMETER: 0.4375 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, CLOSED END, DRAWN SHELL
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.2500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL OUTSIDE DIAMETER0.4375 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
OVERALL WIDTH0.4375 INCHES NOMINAL IN
SPECIAL FEATURESOIL HOLE IN OUTER RACE
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, CLOSED END, DRAWN SHELL
MATERIALSTEEL OVERALL
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
207642Interchangeable
interchangeable cross-reference
interchangeable
101471Interchangeable
interchangeable cross-reference
interchangeable
207642-2Interchangeable
interchangeable cross-reference
interchangeable
02-1867Interchangeable
interchangeable cross-reference
interchangeable
207.642Interchangeable
interchangeable cross-reference
interchangeable
6515NCM021213Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M-471-OH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M-471-OH?
M-471-OH is a BEARING,ROLLER,NEEDLE.
What parts can replace M-471-OH?
There are 6 known substitutes for M-471-OH: 207642, 101471, 207642-2 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M-471-OH?
M-471-OH is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-8878. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M-471-OH

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026