PartsTable
Technical Data Sheet
Download PDF

M-17151 — BOLT,INTERNAL WRENCHING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

M-17151: BOLT,INTERNAL WRENCHING.

The BOLT,INTERNAL WRENCHING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL, hole_type: DRILLED, head_style: FLAT CHAMFER, head_height: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-135-1138, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M-17151
NSN: 5306-01-135-1138
FSC: 5306 — Bolts
CAGE: 06351 — MICROWAVE ENGINEERING CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
hole_typeDRILLED
head_styleFLAT CHAMFER
head_height0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
hole_diameter0.033 INCHES MINIMUM AND 0.039 INCHES MAXIMUM IN
hole_quantity2
thread_length0.100 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
fastener_length0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
NSN5306-01-135-1138
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: M-17151 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.1094 INCHES MINIMUM AND 0.1111 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.100 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
•
HOLE CONFIGURATION STYLE: ROUND INTERNAL HEXAGON
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
FIRST DIAMETER FROM HEAD: 0.094 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.1094 INCHES MINIMUM AND 0.1111 INCHES MAXIMUM IN
HEAD HEIGHT0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
FASTENER LENGTH0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.100 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
HOLE CONFIGURATION STYLEROUND INTERNAL HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
FIRST DIAMETER FROM HEAD0.094 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT CHAMFER
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 2
10115933Reference document
Same NSN cross-reference
Reference document — Informative reference only
GS553AW06-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy M-17151?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M-17151?
M-17151 is a BOLT,INTERNAL WRENCHING.
What parts can replace M-17151?
There are 2 known substitutes for M-17151: 10115933, GS553AW06-8. Substitute compatibility should be verified for your specific system.
What is the NSN for M-17151?
M-17151 is cataloged in the U.S. Government catalog under NSN 5306-01-135-1138. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M-17151

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.