PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M-12N

M-12N — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The ROLLER,LINEAR-ROTARY MOTION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 12.00 MILLIMETERS NOMINAL MM, overall_width: 2.070 INCHES MINIMUM AND 2.130 INCHES MAXIMUM IN, load_direction: RADIAL, overall_height: 0.950 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-144-8497, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M-12N
NSN: 3110-00-144-8497
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter12.00 MILLIMETERS NOMINAL MM
overall_width2.070 INCHES MINIMUM AND 2.130 INCHES MAXIMUM IN
load_directionRADIAL
overall_height0.950 INCHES MAXIMUM IN
overall_length4.980 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
end_item_identificationE-2C ACFT
overall_outside_diameter37.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
NSN3110-00-144-8497
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M-12N · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 12.00 MILLIMETERS NOMINAL MM
•
OVERALL OUTSIDE DIAMETER: 37.0 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
BORE DIAMETER12.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER37.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
OVERALL WIDTH9.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
1UInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1SC1-BInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1-1HBZBInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1L-2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1HInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
C-1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M-12N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M-12N?
M-12N is a ROLLER,LINEAR-ROTARY MOTION.
What parts can replace M-12N?
There are 21 known substitutes for M-12N: 1U, 1SC1-B, 1-1HBZB and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M-12N?
M-12N is cataloged in the Federal Logistics Information System under NSN 3110-00-144-8497. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M-12N

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026