PartsTable
Technical Data Sheet
PartsTable / COMPONENT / LW532
LW532 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.319 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN, outside_diameter: 0.575 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: CADMIUM OVERALL, material_thickness: 0.056 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0669, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LW532
NSN: 5310-00-167-0669
FSC: 5310
CAGE: 57733 — STEWART-WARNER CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.319 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN
outside_diameter0.575 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM OVERALL
material_thickness0.056 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
NSN5310-00-167-0669
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: LW532 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.056 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
HOLE DIAMETER: 0.319 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.575 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.056 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
HOLE DIAMETER0.319 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.575 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
109Interchangeable
interchangeable cross-reference
interchangeable
2065-16Interchangeable
interchangeable cross-reference
interchangeable
CT1087Interchangeable
interchangeable cross-reference
interchangeable
12Z3018-54Interchangeable
interchangeable cross-reference
interchangeable
414908PC114Interchangeable
interchangeable cross-reference
interchangeable
AN935-516LInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy LW532?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LW532?
LW532 is a WASHER,LOCK.
What parts can replace LW532?
There are 25 known substitutes for LW532: 109, 2065-16, CT1087 and 22 more. Substitute compatibility should be verified for your specific system.
Is LW532 still available?
LW532 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LW532

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026